Components & Accessories
AMM (Alarm Monitoring Module)
635 Alarm Monitoring Module (AMM). The AMM allows the system to monitor up to (16) inputs devices (i.e. forced entry, low temperature, etc.), and notify the operator of changes detected. The module connects to a DSI Board using RS-485. As many as...
635 Dual Serial Interface (DSI)
FOR USE w/635 CPU's Ths DSI Board is used to provide RS485 connectivity to specific Galaxy System Components, as well 3rd party devices. Connected to the CPU via the IC2 bus (ribbon cable), the DSI provides (2) independant channels of...
6XX SERIES CPU
The 600-series Central Processing Unit (CPU) manages the access rules, schedules, and cards, as well as handling event data to and from the peripheral hardware (doors, readers, inputs and outputs, etc.). This allows the...
6XX SERIES DRM (Dual Reader Module)
Door Reader Module: The DRM board has two independent reader ports per board and two relays for each reader port. The DRM offers supervision of door contacts and provides surge protection to guard against equipment damage...
6XX SERIES DIO (Digital Input/Output)
Digital Input/Output Board (DIO): The DIO board controls inputs & outputs with user-defined schedules and an extensive array of configurable options. The DIO board reports the appropriate input status and alarm event (trouble or...
600 SERIES DSI
FOR USE w/600 CPU's Dual Serial Interface (DSI) Interface Board: The DSI board is designed as a 3rd party integration solution for devices using RS-485 protocol. There are two RS-485 ports per board that support RS-485 devices in...
6XX SERIES RELAY BOARD
General Relay & Elevator Relay Interface Boards: Relay boards can be used to drive General Relay Outputs or Elevator Relay Outputs. The Relay board supports eight relays per board and interoperates with the Galaxy DSI board...
8 Door Ribbon Cable (Medium Controller)
I2C Bus Ribbon Cable. Used to connect the CPU to other boards in the same controller. Engineered product. Can not be extended or modified.
16 Door Ribbon Cable (Large Controller)
I2C Bus Ribbon Cable. Used to connect the CPU to other boards in the same controller. Engineered product. Can not be extended or modified.
600/635 Diagramming/Diagnostic Cable
600/635 Diagramming/Diagnostic Cable CBL 11701-B (WIDGET Cable)
-
600/635 Dual Power Supply Wiring Harness
600/635 Series 8 Dr Controller Double Power Supply Wiring Harness (Come pre-installed on 6 & 8 Dr Configurations). Required for upgrading 2 & 4 Dr Controllers to 6 & 8 Dr Controllers. DOES NOT INCLUDE SECONDARY SMP3 POWER SUPPLY.
600/635 Power Supply
SMP-3 Power Supply. Direct replacment or addition to the Small (2 reader) and the Medium (8 reader) controllers. Includes PCB Board, Battery and Plugin Xformer. Spec Sheet
Stacker Kit
Stacker kit for use with the relay boards. 1 Set contains hardware to mount 2 relay boards. Kit allows top boad to be manuvered to allow access to board behind.